Daily repair and maintenance of the granule packing machine
The best way to repair and maintain the granule packing machine is to lubricate the parts:
1 The machine part of the machine is equipped with an oil meter. It should be refueled once before driving. It can be added in the middle according to the temperature rise and operation of each bearing.
2 The worm gear box must store oil for a long time. Its oil level is all invaded into the oil. If it is used frequently, it should be replaced with new oil every three months. There is oil plug at the bottom of the sputum.
3 When the machine is refueling, do not let the oil spill out of the cup, and do not flow around the machine and on the ground. Because oil is easy to contaminate materials, affecting product quality.
Maintenance process and method of granule packing machine:
1. Check the machine regularly and check it once a month to check whether the worm gear, the worm, the bolts on the lubrication block, the bearing and other moving parts are flexible and wearable. The defects should be repaired in time and should not be used barely.
2. The machine should be used in a dry and clean room. It should not be used in places where the atmosphere contains acids and other gases that are corrosive to the body.
3. After the machine is used or stopped, the rotating drum should be taken out to clean and brush the remaining powder in the bucket, and then installed, ready for the next use.
4. If the deactivation time is long, the machine must be cleaned and cleaned. The smooth surface of the machine is coated with anti-rust oil and covered with a cloth.